OUTDOOR E6
WiFi 7Directional high-capacity WiFi
TECH SPECSBuy
Overview
| Wireless technology | WiFi 7 |
|---|---|
| Radio configuration | 5 or 6 GHz directional radio |
| Maximum radio rates | 11,528 Mbps WiFi |
| Spatial Diversity | 4x4 MIMO |
| Network interfaces | 2.5 GbE + 10G SFP+ |
| Enclosure / protection | IP67 |
Radio & Antenna
| Antenna configuration | Integrated 4x 19 dBi · 120° |
|---|---|
| Channel width | 20 / 40 / 80 / 160 / 320 MHz |
| Maximum transmit power | 30 dBm |
Hardware
| Operating temperature | −40 to +70°C |
|---|---|
| Dimensions | 620 × 240 × 75 mm |
| Weight | 3.5 kg |
| Power | PoE 22–56 V / DC 12 V |
| Architecture | Outdoor WiFi access / PtMP |
| Processor | Quad-core ARM Cortex-A53 · 1.5 GHz |
| RAM | 1 GB |
| Flash | 128 MB |
| Maximum consumption | <16 W |
| Surge suppression | 8 kV |
Networking & Management
| Wireless operating modes | AP WDS · Client WDS |
|---|---|
| Network modes | Bridge · Router |
| Wireless security | WPA-PSK · WPA2-PSK · WPA/WPA2-PSK (AES / TKIP) |
| VLAN | IEEE 802.1Q |
| DHCP | Server · Client |
| Management | HTTP / HTTPS · SNMPv1/v2/v3 · TR-069 · SSH |
PHY rates are theoretical. Actual throughput and range depend on radio configuration and operating conditions. Available frequencies, channel widths and transmit power depend on the country of operation.
STANDARD PACKAGE
In the box
Package configuration for OUTDOOR E6.
Package contents available on request.
Confirm the supplied mounting and power accessories for your configuration.
Request package detailsPRODUCT PHOTOGRAPHY
OUTDOOR E6, in detail.
Explore the original product views.
INSTALLATION ESSENTIALS
Complete the installation.
Connection and mounting requirements for OUTDOOR E6.
Installation support
Suitable mounting support and clearance.
Check your deployment configurationNetwork connection
2.5 GbE + 10G SFP+
Check your deployment configurationPower supply
PoE 22–56 V / DC 12 V
Check your deployment configurationINSTALLATION NOTES
Install. Connect. Configure.
Deployment checklist for OUTDOOR E6.
Position the device
Secure the unit on a suitable outdoor support and protect all exposed connections.
Prepare the antennas
Keep the antenna coverage area clear of obstructions.
Connect network and power
Use the documented Ethernet and power interfaces. Verify the supply requirements on the device label.
Configure wireless access
Configure the country, SSIDs, authentication and VLAN settings. Verify coverage with a client device.
OUTDOOR E6